Our Support Commitment to You

Our clients know that we are committed to them. If you need FEMAP help and support, and are our client, please contact us by telephone, or use the links below to contact us via email. Our engineers will follow up soon to determine a solution.

Want to become a client? Please contact us.

Support Line: 800-746-8134
Hours: 8:00am to 5:00pm (Pacific Time)

Sample image

FEMAP Support

Support for FEMAP & NX Nastran, the leading pre- & post-processor for advanced FEA.

FEMAP Support


George Laird


George Laird, Phd, PE, is Principal Mechanical Engineer for Applied CAx and Predictive Engineering. Author of over 40 publications on wear, fracture mechanics and finite element analysis, and the “Abrasion-Resistant Cast Iron Handbook.”

More about George


Clay Hearn, Phd, is Staff Mechanical Engineer at Predictive Engineering with over 15 years experience. Clay is our resident CFD expert and gained his initial experience at the the Center for Electromechanics (CEM), a self-funded research organization at the University of Texas at Austin.

More about Clay
Nathan Anderson


Nathan Anderson, PE,  is a Staff Engineer at Predictive Engineering and FEMAP support provider for Applied CAx with 8 years of experience. Starting his career as a design engineer for a large equipment manufacturer, he quickly gravitated toward simulation and analysis to solve his engineering challenges. After a few years as a design engineer he joined our team and made the switch to simulation engineer.

More about Nathan

Another great webinar from Applied CAx. I very much appreciate the descriptions, the reference sources, the logic and rational about when things are enough or too much, and even all the extra items that you talk about. When the webinar recording comes out on your site, I like to go through it again very slowly and listen very carefully and make sure I understand all your points. I very much appreciate you providing these webinars, that is why I switched to Applied CAx as my VAR. I first learned of Applied CAx when I was working at SpaceX, and one of your webinars was used by our engineering group to help explain some aspect of FEMAP.

David Sample
Owner/Engineer / Reliant Engineering & Design

Adrian and Applied CAx consistently get back to me within a few hours with helpful tips or insights. Engineers know that you can't extend a deadline because your FEA support was late in getting back to you. This is why I truly appreciate the level of support Applied CAx provides... They are an excellent resource and I’m glad to have their support.

Allen Foulstone
Sr. Systems Engineer / Stratolaunch

I’ve been working with Applied CAx and Predictive Engineering for more than ten years. Their customer support and technical experience is the best in the industry.

Kenneth Biggio
Structural Analysis Lead / Abengoa Solar